Achievements

THT GENIE 760-IJ injection probe with probe manifold flange-mounted by SOCLEMA.

The epoxy-painted connecting flange is also supplied by SOCLEMA.

GENIE 702 natural gas sampling pipe mounted on SOCLEMA flange.

GENIE 701 sampling manifold with GENIE GHR regulator and SOCMS safety manifold

These GENIE 755 sampling probes, with integrated membrane and pressure regulation at the tip of the probe, are installed on flanges supplied and painted by SOCLEMA. SOCMS safety manifolds were also installed at the sampling probe outlet to control pressure and block gas flow if necessary. The installation was carried out by a SOCLEMA technician to replace old GENIE GPRiL sampling probes.

GENIE 701 sampling pipe with outlet manifold installed on site in September 2023

Manifold assembly for gas analysis sampling, consisting of a GENIE 701 sampling rod, to be installed on site in September 2023.

GENIE 750 sampling probe with manifold installed on site in September 2023

GENIE 755 sampling probes with SOCLEMA safety manifold mounted on flange in September 2023

Probe outlet enclosure for odorant injection control installed on GENIE 702-IJ injection probe

Protective coalescer for recycling sampling line

This equipment is designed to measure impurities in hydrogen from various production processes on pilot plants or production sites.

Sampling panel with MERLIN Gaz cyclone separator and GENIE 120 membrane separator

Supply and installation of sampling probes on the TROLL pipeline at the Taisnières sur Hon metering station.

GENIE 750 sampling probes are designed for sampling network-quality natural gas. They can be inserted and removed from the pressurized pipeline by means of a full-opening valve, without the need for special tools. These probes are available in a range of lengths, from 20 cm to 1.22 m, and their insertion length is adjustable.

In this case, the probes were made to order in specific lengths according to the customer's specifications.

They are fitted with a membrane at the end; the membrane separates liquids and particles so that the sample is free of them.

 SOCLEMA supplied some thirty sampling probes for a steam cracker in northern France. These sampling probes were installed in various ethylene production areas, used in the manufacture of plastics.

These are GENIE 760 sampling probes with FKM and HNBR 985 seals connected to chromatographs for measuring impurities and moisture in ethylene.

These sampling probes were installed as part of a scheduled maintenance program to replace compression seal fittings, to ensure greater safety and pressure resistance.

A conditioning enclosure that allows the gas sample to be taken and conditioned with a separator and a heated pressure regulator, all flange-mounted.

Usually, this type of enclosure is fitted with a membrane probe. In this case, however, a non-membrane probe(GENIE GPHV) has been selected, as it is more resistant to high flow rates. Separation is ensured by a separator installed in the enclosure. This GENIE 133 separator has a larger internal volume than other GENIE separators, making it easier to remove large quantities of liquid.

The ZEGAZ HCD500 dew point analyzer was integrated into a cabinet and connected on site.

Sampling system for high-pressure gas water content analysis at storage wellhead outlet

GENIE 755 biomethane probe

Installation of GENIE 702 sampling probes

Inserting a GENIE 755 probe with ACC-SW tool

Pyrolysis gas sampling and cleaning system with MERLIN cyclone separator

Tornado 602 installed on liquid sample conditioning panel

Conditioning enclosure with AVENGER filter

Gas sample conditioning enclosure

Sampling and conditioning with GENIE 702 probes and enclosure

This portable sampling system enables a gas sample to be conditioned in complete safety, with sampling via a sampling probe. The trolley is used to sample synthesis gas produced by pyrogasification of dry biomass. It connects directly to the sampling probe.

The equipment is designed to condition the gas sample before it passes through the analyzers, the aim being to cool the sample and trap the tars before analysis.

Tars are separated and "trapped" in a bottle using the MERLIN cyclonic separator.

This equipment is part of the METHAGRID project, which aims to develop a process for the biological methanation of hydrogen and/or syngas from biomass gasification, with a view to injecting bio-methane into transmission networks.

GENIE 755 sampling probe and safety manifold installed at the Cazilhac station

Modular, mobile sampling case system for spot sampling of trace compounds in syngas, biogas, bio-methane, natural gas and hydrogen.

Traced tubing installed at IFPEN

GENIE 755 probe-mounted isolation enclosure installed as part of the Sauveterre de Guyenne project

GENIE 702-IJ injection probes and odorant injection control enclosures

Injection control enclosure on GENIE 702-IJ injection probe

GENIE 702 sampling probe fitted with GENIE GR regulator and insulated jackets to prevent condensation.

GENIE 701 portable sampling probe installed at Loon Plage

SOCLEMA's technical team installed its equipment at the Brouckerque site in northern France for the TULIPE project: 702-IJ injection probes with probe outlet enclosures for injection control, sampling probes with conditioning enclosures, flanges, traced tubing....

GENIE 702 sampling probe installed at Brouckerque

Electric traced tubing installed at the Brouckerque gas station as part of the TULIPE project

GENIE 755 sampling probe with flange and safety manifold

Installation of a MERLIN Liquid cyclone separator to complement the Mini Singa Galaxy separator

In refining processes, on-line analyzers used to continuously monitor fuel properties are essential to ensure that the final product is within the permitted tolerance.

Unfortunately, liquid fuels often form emulsions with particles and water, preventing optical reading of a colorimeter. Water in emulsion can also form deposits on the analyzer cell, creating an inaccurate and unreliable reading.

TOTAL has finally found the solution for clarifying kerosene prior to crystal point and color analysis: the Singa Galaxy separator.

The Singa Galaxy separator installed by SOCLEMA is really effective. The video shows that there is no water at all when the kerosene sample leaves the Singa Galaxy separator.

Maintenance is considerably reduced and analysis can be carried out correctly.

This system can also be used for other hydrocarbons, such as diesel.

A Singa Galaxy separator was installed for a similar application at Petroineos, where it also proved its efficiency.

Thermowell probes installed at Etrez

Installation of GENIE 702 Sampling Probes

GENIE GPHV sampling probe with GENIE 133 separator and GR regulator for sampling

Probe outlet enclosure for injection control installed on GPiL pipe

Adapter specially designed and manufactured to install the analyzer directly at the sampling point, on the probe.

Panel with GENIE 120 separator for the pharmaceutical industry

GENIE 755 sampling probe installed at the Chagny Biomethane station

Odorant injection enclosures on injection probes at PITGAM

GENIE 755 sampling probe installation

Refinery liquid sample conditioning panel with GENIE 225 separator & TORNADO 602 filter

THT GENIE 760-IJ injection probes for natural gas odorization

THT injection probes for natural gas odorization

Panel with GENIE 120 separator to protect analyzer from liquids

GENIE 755 sampling probe with safety manifold

GENIE 755 sampling probe

GENIE GPR sampling probe installed at Céré la Ronde

Sample conditioning panel with GENIE 123 separator

GENIE GPR sampling probes installed at Fos sur Mer