• Out of stock
In-line thermal safety valve for high-temperature samples - HST
search

In-line thermal safety valve for high-temperature samples - HST

HST valves prevent excessively hot samples from reaching and damaging the analyzer and other electronic instruments. The sample normally flows through the open valve when the sample temperature is below the valve's set point. If the sample temperature exceeds this setpoint, the HST valve closes. When the temperature drops below the set point, the valve opens again.

  • Maximum operating pressure: 207 bar (3000 psi)
  • Maximum temperature: 149°C
  • Possible opening temperatures from 37 to 85°C
  • Seal material : EDPM / Viton or Kalrez
  • Connection: 1/2" NPT
Have a project ?
DO NOT HESITATE
TO CONTACT US
Documentation
Achievements
Our services
Studies &
Consulting
As an expert in sampling solutions for the analysis of natural gas and hydrocarbons, SOCLEMA can provide a complete service.
close
SAMPLING SOLUTIONS FOR INDUSTRIAL ANALYSIS

As an expert in sampling solutions for the analysis of natural gas and hydrocarbons, SOCLEMA can provide complete support for any sampling project.

SOCLEMA puts its expertise at your service:

- audits of your sampling systems, with advice on best practices and recommendations for improving these systems

- studies on your sampling line projects

Have a project ?
DO NOT HESITATE
TO CONTACT US
Training
Product presentation and training
close
Training courses to learn all about sampling | SOCLEMA

SOCLEMA offers practical training courses on sampling probes.

The training objectives are as follows:

  • Recognize the different types of probes installed on the networks
  • Know the characteristics of these probes
  • Know how to install, extract and reinsert them safely under load
  • Perform simple maintenance
  • Know how to check or diagnose malfunctions or breakdowns on the sampling line.

Training comprises both theory and practice. Practical training is carried out on a pressurized training bench (40 bar) on which operators can practice. In particular, the GENIE GPR, GENIE 701, GENIE 702 and GENIE 755 sampling probes are reviewed.

Each training session lasts 2 days and can accommodate 3 people.

These courses are open to all interested parties, and can be run in either French or English.

Have a project ?
DO NOT HESITATE
TO CONTACT US
Installation
SOCLEMA can help you with the installation and commissioning of your sampling probes, as well as training your staff.
close
Installation of your sampling lines

SOCLEMA can help you with the installation and commissioning of your sampling probes, as well as training your staff.

SOCLEMA's specialized technician will be on hand to assist the technical staff responsible for installation of our pressure sampling systems. He will assist the technical staff in charge of working on this equipment, and explain in detail the various stages involved in installing the sampling probe, right through to starting up the pressurized installation.

SOCLEMA AT YOUR SERVICE FOR ALL YOUR NEEDS

SOCLEMA can also intervene at the customer's request to remove the housing/sampling probe assembly under pressure, for example, when piggings are programmed to pass through the pipe. The SOCLEMA technician works autonomously on site, equipped with the necessary tools.

Have a project ?
DO NOT HESITATE
TO CONTACT US
Maintenance
Complete dismantling of the probe, Expertise of the probe, Replacement of defective parts - Cleaning of the probe, Reassembly of the probe
close
Maintenance and servicing

SOCLEMA maintains the sampling probes installed:

Complete probe disassembly
Expertise of the probe
Replacement of defective parts
Cleaning of theprobe
Reassembly of the probe

This service can be provided on an ad hoc basis at the customer's request, or as part of a maintenance contract with scheduled periodic checks for a fleet of sampling probes.

Have a project ?
DO NOT HESITATE
TO CONTACT US

SOCLEMA, on the road to sustainable development

Aware that every company, however small, has an impact on the environment, SOCLEMA is committed to sustainable development.

Find out more
DECATHLON SUSTAINABILITY ANNUAL REPORTS
close
SOCLEMA, on the road to sustainable development

Aware that every company, however small, has an impact on the environment, SOCLEMA is committed to sustainable development.

The new building designed by Mr. PERNOT is part of this sustainable development approach, with optimized energy performance thanks to insulation, the use of natural light, the recovery and use of rainwater for sanitary facilities, and the provision of an electric recharging point... All this in a business park offering a green environment where the Communauté de Commune has preserved natural spaces and ecological basins, and installed compost bins...

The second action concerns waste management. In order to reduce waste production, awareness of best practices has been raised: print only when necessary, use as scrap paper a sheet that has only been printed on one side... Without yet going paperless, SOCLEMA has set up an IT tool to store, organize and retrieve all the documents needed for day-to-day operations (quotations, invoices, technical documentation...). The company has also introduced selective sorting of paper, cardboard, glass and other workshop waste.

Finally, we apply this approach to the packaging products we use for our material shipments: reuse or recycling of cardboard, use of eco-responsible packaging, reduced use of plastic packaging...

Have a project ?
DO NOT HESITATE
TO CONTACT US