Sampling and injection solutions

Odorization skid for natural gas and biomethane OdoZEN

OdoZEN is a patented odorization system for natural gas. This high-precision system reacts to sudden variations in pressure and flow, and covers a wide injection range.

Quick overview More

Sample multiplexing cabinet

SOCLEMA designs and builds customized sample multiplexing cabinets.

Quick overview More

Syngas sampling panel

SOCLEMA designs and manufactures Syngas sampling systems. They are designed to condition the gas sample before it passes through the analyzers, the aim being to cool the sample and trap the tars before analysis.

Quick overview More

Tar protocol sampling system

SOCLEMA provides a turnkey solution for sampling synthetic gases (syngas) from pyrolysis gasification. This solution enables the characterization of organic contaminants such as tars (BTEX, PAHs, phenol and derivatives, thiophene, etc.) produced during this process (Tar).

Quick overview More

Conditioning and sampling set Liquid

SOCLEMA designs and manufactures bespoke enclosures for sampling and conditioning liquid samples.

Quick overview More

Odorant injection enclosure

The probe outlet enclosure for odorant injection control is a system that enables pressure and flow measurements to be taken directly at the injection point. These measurements are redundant with those taken by the instruments installed on the pumps.

Quick overview More

Gas conditioning board

SOCLEMA designs and manufactures gas sample conditioning panels.

Quick overview More

Mobile sampling cabinet for hydrogen measurement

SOCLEMA designs and manufactures customized mobile sampling cabinets for sampling and conditioning gaseous samples.

Quick overview More

Gas conditioning case

SOCLEMA offers tailor-made cases for taking and conditioning spot gas samples.

Quick overview More

MERLIN MGCS gas cyclone separator

The MERLIN MGCS cyclone separator is an innovative, patented separation technology that protects on-line gas analyzers from liquids, solid particles and oil mist in the sample. It is used in particular for measurements on biogas, syngas, measurements after sample washing and pre-conditioning. It has...

Quick overview More

MERLIN MLCS liquid cyclone separator

The MERLIN MLCS cyclone separator is an innovative, patented separation technology that protects liquid analyzers by separating biphasic, particle-loaded mixtures. It is particularly maintenance-free.

Quick overview More

Mini Singa Galaxy double-stage coalescer

The Mini Singa Galaxy coalescer clarifies refined petroleum products by removing particles and water. It can be used for various physical measurements such as flash point or cloud point.

Quick overview More

GENIE 750 sampling probe

The GENIE 750 is a fixed probe with membrane for gas sampling. It is installed on a full-opening valve, and its insertion length ranges from 20 cm to 1.2 meters.

Quick overview More

GENIE 755 sampling probe

The GENIE 755 is a fixed probe with integrated membrane and pressure regulation for gas sampling. It is installed on a full-opening valve, and its insertion length ranges from 20 cm to 1.2 meters.

Quick overview More

GENIE 702 sampling probe

The GENIE 702 is a fixed probe with membrane for gas sampling. It is screwed onto a pressurized line via a full-opening valve, and has an insertion length of up to 3 meters.

Quick overview More

GENIE GPR sampling probe

The GENIE GPR model comprises a thermowell and a rod with integrated trigger and diaphragm. The thermowell is installed on a depressurized line via a thread-o-let, and the rod can be inserted and retracted under load. It enables a representative gas sample to be taken.

Quick overview More

GENIE GPSD sampling probe

The GENIE GPSD model is a fixed, under pressure retractable probe designed for small-diameter pipes; it enables a representative gas sample to be taken, and protects the analyzer from liquids thanks to its membrane.

Quick overview More

GENIE GP2 sampling probe

The GENIE GP2 model comprises a housing a membrane probe. The housing is installed on a depressurized line via a thread-o-let, and the probe can be inserted and retracted under pressure. It enables a representative gas sample to be taken.

Quick overview More

GENIE 701 sampling probe

The GENIE 701 is a transportable probe with membrane for gas sampling. It is screwed onto a pressurized line via a full-opening valve; its insertion length is adjustable up to 25 cm.

Quick overview More

GENIE GPHV sampling probe

The GENIE GPHV model is a versatile fixed probe without membrane designed to take a gas sample from a high-flow stream.

Quick overview More

GENIE 760 sampling probe

The GENIE 760 is a fixed, membrane-free probe for taking gaseous or liquid samples. It is installed on a full-opening valve, and its insertion length ranges from 20 cm to 1.2 meters.

Quick overview More

760-IJ injection probe

The 760-IJ injection probe is used to inject odorant into natural gas or biomethane pipelines. It is installed on a full-opening valve; its insertion length ranges from 20 cm to 1.2 meters.

Quick overview More

702-IJ injection probe

The 702-IJ is an injection probe injecting odorant into natural gas and bio-methane pipelines. It is screwed onto a pressurized line via a full-opening valve; its insertion length can be up to 3 meters.

Quick overview More

GENIE 120 membrane separator

The GENIE 120 separator features a membrane to separate liquids from the gas stream and is designed for low-flow gas applications.

Quick overview More

GENIE 170 separator for very low flow rates

GENIE 170 membrane separator

The GENIE 170 separator features a membrane to separate liquids from the gas stream. It is designed to protect gas systems requiring very low flow rates, such as small portable or laboratory analyzers.

Quick overview More

GENIE 123 membrane separator

The GENIE 123 separator is equipped with a membrane to separate liquids from the gas flow and is designed for applications with larger gas flows.

Quick overview More

GENIE 133 separator - Gas applications with large quantities of liquids

GENIE 133 membrane separator

The GENIE 133 separator is equipped with a membrane to separate liquids from the gas stream and is designed for applications with large quantities of liquids.

Quick overview More

TORNADO 602 filter

The continuously self-cleaning TORNADO 602 filter protects analyzers from particles in liquid samples. The filter element blocks contaminants, which are removed by the bypass. This filter is usually installed before the GENIE 225 membrane separator.

Quick overview More

GENIE 225 membrane separator

The GENIE 225 separator is equipped with a membrane to separate water, sulfuric and caustic acid, and other immiscible liquids from a liquid stream. It is often installed after the TORNADO 602 filter.

Quick overview More

AVENGER 33 filter

The AVENGER 33 filter features a filter cartridge to remove particles from gas and liquid streams. It is suitable for applications with high flow rates or large quantities of contaminants.

Quick overview More

AVENGER 33M filter

The AVENGER 33M filter features a filter cartridge and membrane to remove both particles and liquids from gas streams. It is suitable for applications with high flow rates or large quantities of contaminants.

Quick overview More

AVENGER 38 filter

The AVENGER 38 filter features a filter cartridge to remove particles from gas and liquid streams. It is suitable for applications with medium flow rates and medium quantities of contaminants.

Quick overview More

AVENGER 38M filter

The AVENGER 38M filter features a filter cartridge and membrane to remove both particles and liquids from the gas sample. It is suitable for applications with medium flow rates and medium quantities of contaminants.

Quick overview More

AVENGER 91 filter

The AVENGER 91 filter is equipped with a filter cartridge to remove particles from gaseous or liquid samples. It withstands higher pressures than models 33 or 38.

Quick overview More

GENIE GR Single-stage unheated gas pressure regulator

The GENIE GR is an unheated, single-stage regulator specially designed for gas analysis systems. Five output pressure ranges are available

Quick overview More

GENIE GHR Heated single-stage gas pressure regulator

The GENIE GHR regulator is a single-stage, heated regulator specially designed for gas analysis systems. Five output pressure ranges are available

Quick overview More

GENIE JTR Unheated four-stage pressure regulator

The GENIE JTR is an unheated four-stage regulator specially designed for gas analysis systems. Five output pressure ranges are available.

Quick overview More

GENIE JTR-H Heated four-stage gas pressure regulator

The GENIE JTR-H is a heated four-stage regulator specially designed for gas analysis systems. Five output pressure ranges are available.

Quick overview More

TPE electric trace tube - TRACEPAK

TPE tubing is a pre-insulated tube bundle with self-regulating electrical tracing designed to provide protection against freezing, limit temperature variations or control viscosity. It's perfect for maintaining very long sections of impulse lines or piping at constant temperatures from end to end.

Quick overview More

Strong steam tracing tube TPH - TRACEPAK

The TPH tube is a pre-insulated tube bundle with strong steam tracing, the process tubes being in contact with the tracer, which thus maintains them at elevated temperatures. TPH is recommended for sample transfer lines, instrument impulse lines, additive additions and small-diameter process lines where high temperature maintenance is...

Quick overview More

Tube traced moderate steam TPL - TRACEPAK

The TPL tube is a bundle of pre-insulated tubes with moderate tracing, the tracer tube being covered with insulation to reduce heat transfer. It is suitable for small-diameter process lines, such as those used for instrumentation, sampling or additive addition. It offers a more uniform tube temperature over large...

Quick overview More

S-Line pre-insulated tube - TRACEPAK

S-LINE pre-insulated pipe is recommended for steam, condensate, liquid and gas lines from 0 to 25mm, where personnel protection and heat loss are important parameters. S-LINE is a less expensive alternative to on-site insulation and sealing of small-diameter lines.

Quick overview More

J-Line coated tube - TRACEPAK

J-Line tubing is used in applications requiring extra protection, but is neither insulated nor heated. It's ideal for pneumatic and hydraulic applications; the SV47 coating offers added protection against wear due to vibration.

Quick overview More

TrueTube CP Chemically polished and cleaned tube

TrueTube CP is a seamless drawn 316L stainless steel tube chemically polished and cleaned to a surface finish of 1.02 µ. TrueTube CP also complies with ASTM A632-S3 for thermocouple cleaning. It helps reduce response times by reducing surface finish and contaminants.

Quick overview More

TrueTube FS Chemically polished and treated tube Sulfinert

TrueTube FS is a chemically polished 316L seamless drawn tube treated and coated with SilcoNert™ 2000. This silicone coating improves corrosion resistance and reduces the affinity of stainless steel for certain compounds such as H2S. SilcoNert 2000-treated tubes are widely used for the analysis of low-level sulfur compounds.

Quick overview More

TrueTube EP electropolished tube

TrueTube EP is a 316L SS electropolished tube of selected quality. Electropolishing not only improves surface roughness, but also enhances corrosion resistance by leaving a chromium-enriched surface layer. It is ideal for use in critical analysis systems.

Quick overview More

TrueTube EPS Sulfinert electropolished tube

TrueTube EPS is a 316L stainless steel tube, electropolished, chromium-enriched, and internally bonded with an amorphous silicon layer applied via chemical vapor deposition (CVD technology). This combination provides the ultimate inert stainless steel tube with improved corrosion resistance and drying capabilities at...

Quick overview More

DewPort Portable Dew Point Analyzer for Water and Hydrocarbons

DewPort™ is a portable analyzer that simultaneously determines the dew points of water and hydrocarbons. Based on infrared spectroscopic technology, it enables extremely accurate, calculation-free measurements.

Quick overview More

DewPoint Duo Water and Hydrocarbon Dew Point Analyzer

The DewPoint Duo dew point analyzer measures both water and hydrocarbon dew points. Based on infrared spectroscopic technology, it enables extremely precise, calculation-free measurements.

Quick overview More

HCD5000 Hydrocarbon Dew Point Analyzer

Based on infrared spectroscopic technology, the HCD5000 hydrocarbon dew point analyzer distinguishes between hydrocarbon and water dew points. It provides extremely accurate, calculation-free measurements.

Quick overview More

WDP5000 Water Dew Point Analyzer

The WDP5000 online water dew point analyzer measures the actual water dew point at process pressure and indicates the water content, without any calculation.

Quick overview More

SOCMS Safety Manifold

SOCLEMA offers safety manifolds for gas pressure regulation. These assemblies consist of a pressure gauge, a ball valve and a valve, and are used with Genie® pressure regulators or Genie® pressure-reducing probes. These assemblies control the pressure at the regulator outlet and block the flow in the event of...

Quick overview More

SOCPROTHERM Insulated jacket

Insulated jackets designed to isolate the area around the sampling point, including valves, sampling probes, regulators and all sampling equipment located directly at the sampling point. This insulation prevents the build-up of condensation and the ensuing problems.

Quick overview More

Gas conditioning and sampling box

SOCLEMA designs and manufactures customized enclosures for sampling and conditioning gaseous samples.

Quick overview More

Liquid conditioning panel

SOCLEMA designs and manufactures liquid sample conditioning plates.

Quick overview More

Syngas sampling and conditioning bench

SOCLEMA designs and manufactures customized mobile sampling bays for taking and conditioning syngas samples.

Quick overview More

TAR PROTOCOL sampling trolley

SOCLEMA provides a turnkey solution for sampling synthetic gases (syngas) from pyrolysis gasification. This solution enables the characterization of organic contaminants such as tars (BTEX, PAHs, phenol and derivatives, thiophene, etc.) produced during this process (Tar).

Quick overview More

Electrical trace tube CEMS - STACKPAK

STACKPAK ® is a tube system for sample transport used in flue gas monitoring (CEMS). STACKPAK transport lines maintain uniform temperatures for gas samples such as O2, CO, NOx, SO2 and NH3, while ensuring temperature maintenance and protection against condensation.

Quick overview More

Cookie name	Supplier	Purpose	Expiration
cookiesplus	soclema.com	Save your cookie preferences.	1 year
PrestaShop-#	soclema.com	This cookie keeps the user's sessions open during their visit, and allows them to place orders or a whole set of functions such as: date cookie added, language selected, currency used, last product category visited, products recently viewed, agreement to use site services, customer ID, login ID, last name, first name, logged-in status, your encrypted password, e-mail linked to customer account, shopping cart ID.	480 hours

Cookie name	Supplier	Purpose	Expiration
collect	Google	It is used to send data to Google Analytics about the visitor's device and behavior. Track the visitor across devices and marketing channels.	Session
_gd#	Google	This is a Google Analytics session cookie used to generate statistical data about how you use the website, which is deleted when you exit your browser.	Session

Sampling solutions for every application

Applications

Sampling solutions
for every application