• Out of stock
GENIE 133 separator - Gas applications with large quantities of liquids
search

GENIE 133 membrane separator

The GENIE 133 separator is equipped with a membrane to separate liquids from the gas stream and is designed for applications with large quantities of liquids.

Technical Specifications
Maximum operating pressure
206.8 barg (3000 psig)
Maximum temperatures
- 85°C with membrane type 6
- 149°C with membrane type 7
Maximum recommended flow
- 5.4 SLM with membrane type 6
- 7.1 SLM with membrane type 7
Connections
1/4" FNPT
Features
Membrane separator
Gas sample
With membrane
Documentation
FAQ

    The 2 GENIE 123 and GENIE 133 separators are the largest in the A+ Corporation liquid/gas separator range. Although they can handle identical flow rates and temperatures, their design and use are different.

     

    The difference between a 123 separator and a 133 separator

    The GENIE 133 separator has a larger internal cavity than the GENIE 123 separator, and can withstand higher pressures.

    The GENIE 133 separator is ideal for continuous sampling of a gaseous source where large quantities of liquids are present, e.g. for the collection and processing of natural gas, for CEMS and certain refinery and petrochemical gases.

    It can be mounted on a sampling probe (GENIE GPHV or 760) when the probe, fitted with a membrane at its end, is invaded by liquids. It can also be mounted before an analyzer or pump to protect them.

    Finally, it is recommended for sample pre-conditioning in applications where there is no bypass and liquids must be discharged from the separator by gravity.

Achievements
Our services
close
SAMPLING SOLUTIONS FOR INDUSTRIAL ANALYSIS

As an expert in sampling solutions for the analysis of natural gas and hydrocarbons, SOCLEMA can provide complete support for any sampling project.

SOCLEMA puts its expertise at your service:

- audits of your sampling systems, with advice on best practices and recommendations for improving these systems

- studies on your sampling line projects

close
Training courses to learn all about sampling | SOCLEMA

SOCLEMA offers practical training courses on sampling probes.

The training objectives are as follows:

  • Recognize the different types of probes installed on the networks
  • Know the characteristics of these probes
  • Know how to install, extract and reinsert them safely under load
  • Perform simple maintenance
  • Know how to check or diagnose malfunctions or breakdowns on the sampling line.

Training comprises both theory and practice. Practical training is carried out on a pressurized training bench (40 bar) on which operators can practice. In particular, the GENIE GPR, GENIE 701, GENIE 702 and GENIE 755 sampling probes are reviewed.

Each training session lasts 2 days and can accommodate 3 people.

These courses are open to all interested parties, and can be run in either French or English.

close
Installation of your sampling lines

SOCLEMA can help you with the installation and commissioning of your sampling probes, as well as training your staff.

SOCLEMA's specialized technician will be on hand to assist the technical staff responsible for installation of our pressure sampling systems. He will assist the technical staff in charge of working on this equipment, and explain in detail the various stages involved in installing the sampling probe, right through to starting up the pressurized installation.

SOCLEMA AT YOUR SERVICE FOR ALL YOUR NEEDS

SOCLEMA can also intervene at the customer's request to remove the housing/sampling probe assembly under pressure, for example, when piggings are programmed to pass through the pipe. The SOCLEMA technician works autonomously on site, equipped with the necessary tools.

close
Maintenance and servicing

SOCLEMA maintains the sampling probes installed:

Complete probe disassembly
Expertise of the probe
Replacement of defective parts
Cleaning of theprobe
Reassembly of the probe

This service can be provided on an ad hoc basis at the customer's request, or as part of a maintenance contract with scheduled periodic checks for a fleet of sampling probes.

SOCLEMA, on the road to sustainable development

Aware that every company, however small, has an impact on the environment, SOCLEMA is committed to sustainable development.

Find out more
DECATHLON SUSTAINABILITY ANNUAL REPORTS
close
SOCLEMA, on the road to sustainable development

Aware that every company, however small, has an impact on the environment, SOCLEMA is committed to sustainable development.

The new building designed by Mr. PERNOT is part of this sustainable development approach, with optimized energy performance thanks to insulation, the use of natural light, the recovery and use of rainwater for sanitary facilities, and the provision of an electric recharging point... All this in a business park offering a green environment where the Communauté de Commune has preserved natural spaces and ecological basins, and installed compost bins...

The second action concerns waste management. In order to reduce waste production, awareness of best practices has been raised: print only when necessary, use as scrap paper a sheet that has only been printed on one side... Without yet going paperless, SOCLEMA has set up an IT tool to store, organize and retrieve all the documents needed for day-to-day operations (quotations, invoices, technical documentation...). The company has also introduced selective sorting of paper, cardboard, glass and other workshop waste.

Finally, we apply this approach to the packaging products we use for our material shipments: reuse or recycling of cardboard, use of eco-responsible packaging, reduced use of plastic packaging...