Sampling equipment for gas and liquid analysis

Products

SOCLEMA is THE SPECIALIST of sampling systems for gas and liquid analysis. We provide turnkey solutions for natural gas, renewable gases and petroleum products, from sample collection to the point of analysis.

As such, we supply the equipment needed to collect, condition and transfer samples to the analyzer.

To collect samples, we offer sampling probes and samplers. For sample conditioning, i.e. sample processing, we offer separators, filters and regulators for different applications. Finally, to transport the sample to the analyzer, we offer different types of tubes.

MERLIN MGCS gas cyclone separator

The MERLIN MGCS cyclone separator is an innovative, patented separation technology that protects on-line gas analyzers from liquids, solid particles and oil mist in the sample. It is used in particular for measurements on biogas, syngas, measurements after sample washing and pre-conditioning. It has...

Quick overview More

The GENIE GPR model comprises a thermowell and a rod with integrated trigger and diaphragm. The thermowell is installed on a depressurized line via a thread-o-let, and the rod can be inserted and retracted under load. It enables a representative gas sample to be taken.

Quick overview More

S-LINE pre-insulated pipe is recommended for steam, condensate, liquid and gas lines from 0 to 25mm, where personnel protection and heat loss are important parameters. S-LINE is a less expensive alternative to on-site insulation and sealing of small-diameter lines.

Quick overview More

Electrical trace tube CEMS - STACKPAK

STACKPAK ® is a tube system for sample transport used in flue gas monitoring (CEMS). STACKPAK transport lines maintain uniform temperatures for gas samples such as O2, CO, NOx, SO2 and NH3, while ensuring temperature maintenance and protection against condensation.

Quick overview More

TPE electric trace tube - TRACEPAK

TPE tubing is a pre-insulated tube bundle with self-regulating electrical tracing designed to provide protection against freezing, limit temperature variations or control viscosity. It's perfect for maintaining very long sections of impulse lines or piping at constant temperatures from end to end.

Quick overview More

Tube traced moderate steam TPL - TRACEPAK

The TPL tube is a bundle of pre-insulated tubes with moderate tracing, the tracer tube being covered with insulation to reduce heat transfer. It is suitable for small-diameter process lines, such as those used for instrumentation, sampling or additive addition. It offers a more uniform tube temperature over large...

Quick overview More

Strong steam tracing tube TPH - TRACEPAK

The TPH tube is a pre-insulated tube bundle with strong steam tracing, the process tubes being in contact with the tracer, which thus maintains them at elevated temperatures. TPH is recommended for sample transfer lines, instrument impulse lines, additive additions and small-diameter process lines where high temperature maintenance is...

Quick overview More

TrueTube FS is a chemically polished 316L seamless drawn tube treated and coated with SilcoNert™ 2000. This silicone coating improves corrosion resistance and reduces the affinity of stainless steel for certain compounds such as H2S. SilcoNert 2000-treated tubes are widely used for the analysis of low-level sulfur compounds.

Quick overview More

TrueTube CP Chemically polished and cleaned tube

TrueTube CP is a seamless drawn 316L stainless steel tube chemically polished and cleaned to a surface finish of 1.02 µ. TrueTube CP also complies with ASTM A632-S3 for thermocouple cleaning. It helps reduce response times by reducing surface finish and contaminants.

Quick overview More

TrueTube EP electropolished tube

TrueTube EP is a 316L SS electropolished tube of selected quality. Electropolishing not only improves surface roughness, but also enhances corrosion resistance by leaving a chromium-enriched surface layer. It is ideal for use in critical analysis systems.

Quick overview More

TrueTube EPS Sulfinert electropolished tube

TrueTube EPS is a 316L stainless steel tube, electropolished, chromium-enriched, and internally bonded with an amorphous silicon layer applied via chemical vapor deposition (CVD technology). This combination provides the ultimate inert stainless steel tube with improved corrosion resistance and drying capabilities at...

Quick overview More

Cookie name	Supplier	Purpose	Expiration
cookiesplus	soclema.com	Save your cookie preferences.	1 year
PrestaShop-#	soclema.com	This cookie keeps the user's sessions open during their visit, and allows them to place orders or a whole set of functions such as: date cookie added, language selected, currency used, last product category visited, products recently viewed, agreement to use site services, customer ID, login ID, last name, first name, logged-in status, your encrypted password, e-mail linked to customer account, shopping cart ID.	480 hours

Cookie name	Supplier	Purpose	Expiration
collect	Google	It is used to send data to Google Analytics about the visitor's device and behavior. Track the visitor across devices and marketing channels.	Session
_gd#	Google	This is a Google Analytics session cookie used to generate statistical data about how you use the website, which is deleted when you exit your browser.	Session

SAMPLING EQUIPMENT FOR INDUSTRIAL ANALYSIS

Products

SAMPLING EQUIPMENT
FOR INDUSTRIAL ANALYSIS